3M™ NVH Dampening Material, 200 ml, 04274
- 3M ID 62327538302
- UPC 051131042742
Details
Highlights
- Soft, sturdy, non-shrink formula stops vibration and reduces noise between panels, braces and intrusion beams
- Provides 60-minute worktimes to help ensure accurate installation
- Excellent for thin gaps where foam cannot be used or easily replaced
- Can be applied up to 2.5 cm thick to vertical and overhead surfaces with minimal drip
- Non-solvent formula won’t shrink after installation
3M™ NVH Dampening Material is a flexible urethane adhesive-type material for replacing and re-installing factory NVH sealants and foams. This two-part material can be used to coat existing foams before reinstallation of outer body panels, or to fill thin gaps where foam cannot be used. Great for overhead or vertical surfaces, it cures to a flexible yet firm state and affords a 60-minute worktime.
For collision repair jobs where minimizing NVH (noise, vibration and harshness) is important, our 3M™ NVH Dampening Material is an excellent complement to flexible or pillar foams and factory dampening materials. This two-component material applies smoothly and easily between roof skins and roof bows, door skins, door intrusion beams or other areas using non-structural type foam materials. Unlike many seam sealers, this material goes in soft yet remains very sturdy, allowing for expansion and contraction of automotive sheet metal. As it has no solvents, it won’t shrink and pull the metal in after installation. It minimizes application time and cleanup – it applies right from the cartridge without added mixing time, and provides up to a 2.5 cm thick layer of flexible material on vertical and overhead surfaces. 3M™ NVH Dampening Material is especially useful for thin openings such as truck door skins, where installing new foam can become time-consuming – simply coat the existing integrally bonded foam instead of replacing it. Or, install dampening material by itself where foam cannot be used.
Typical Properties
| Adhesive Type | Two-Part Urethane |
| Applications | Sound Deadening, Sound Dampening, Joint Filling, Restoring, Sealing |
| Brands | 3M |
| Consistency | Paste |
| Container Size (Metric) | 200 ml |
| Container Type | Cartridge |
| Full Cure Time | 1 hr |
| Product Type | Dampening Material |
| Surface Type | Painted Surface |
| Tack-free Time | 1 hr |
| Work Time | 60 min |
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
