Scotch-Brite™ SE Surface Conditioning Belts are strong, comprising of resin-reinforced non-woven fibre. We’ve made them with tough, durable aluminium oxide mineral, engineered to resist loading and damage to the work piece when cleaning, blending, deburring and finishing on a variety of metals.

Scotch-Brite™ SE Surface Conditioning Belts are engineered to cut fast and last, resisting wear and sharp edges during cleaning, blending, deburring and finishing on a variety of metals. Our belts are made of resin-reinforced non-woven fibre, designed to resist loading and under-cutting or gouging of the work piece. They use coarse grade aluminium oxide abrasive which cuts fast and lasts longer, and allows the belts to keep their superior durability edge. We also included a woven fabric (scrim) in our conditioning products, which is embedded in the nylon structure to provide additional strength and durability for edge work, deburring and efficient blending of all metal types. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Aluminium oxide is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, compared to traditional abrasives, such as garnet, which quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminium oxide is widely used in grinding applications in addition to sanding and finishing. It’s suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Belt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.