3M™ Cold Shrink Splice Kit 5551-3C-AC, 3/C, 5kV and 8kV, 6 - 3/0 AWG copper or aluminum, 1/Case
- 3M ID 80611236383
- UPC 50051128543172
Details
Highlights
- Designed for splicing shielded, armored or non-armored cables
- 0.37 to 0.78-in O.D. insulation
- Accommodates wire size of 6 to 4/0 AWG (Cu) and 6 to 3/0 AWG (Al)
- Rated for 5/8 kV applications
- Constant Force Spring: No soldering required for shield ground connections
- Shielding Braid Sleeve: Single component provides 2 functions, metallic insulation shield and ground jumper
- No special tools required for installation
- Kit contents (3 splices per kit): * 3 x cold shrink insulators, 3 x cold shrink splice jackets, 3 x Scotch 13 Electrode Wraps, 3 x rolls Scotch® Rubber Mastic Tape 2228, 3 x rolls Scotch® Electrical Semi-Conducting Tape 13, 3 x shielding braid sleeves, 6 x constant force springs, 3 x cleaning pad kits, 1 x roll Scotch® Linerless Rubber Splicing Tape 130C, 1 x roll Scotch® Electrical Shielding Tape 24, 3 x instruction sheets
3M™ 5551-3C-AC Series Cold Shrink Resin Inline Splice Kit is suitable for splicing 5/8 kV shielded, armored or non-armored cables with aluminum or copper conductors.
3M™ Cold Shrink Shielded Splice Kit 5551-3C-AC Series are for splicing 5 kV and 8 kV shielded or non-shielded, armored or non-armored, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three single conductor splices on tape shield, wire shield or UniShield®. Kit includes components for splicing armored cables. The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. The kits are sized to fit cables with copper or aluminum conductors ranging from 6-4/0 AWG.
Typical Properties
