1. All 3M Products
3M United Arab Emirates

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010, blue, 45 ml, 12/Case

Catalog Number DP80103M ID 62286314455
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing .10 minute work life with 60 minute handling strength . Strong adhesive can replace screws, rivets and welding
 More
Product Details

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.

Recommended Applications

  • Joining plastics to metals, such as in the manufacture or repair of appliances
  • Bonding low surface energy plastics without priming
  • Impact resistance composite bonding
  • Manufacture or repair of various sporting goods equipment
  • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

Our 3M™ Scotch-Weld ™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).

Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Resists many chemicals, water, humidity and corrosion
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing .10 minute work life with 60 minute handling strength . Strong adhesive can replace screws, rivets and welding
  • 10 minute work life with 60 minute handling strength
  • Strong adhesive can replace screws, rivets and welding
Specifications
Adhesive Type
Acrylic
Design Challenges
Noise Vibration & Harshness Control NVH
Full Cure
8-24 Hours @ 72 F (22 C)
Hardness
55-60 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
NPVI Mktg
Yes
Open Time
10 Minute
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Structural Plastic Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
2700 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
12
Storage Temperature
<=40 Degree Fahrenheit
Viscosity
Self-Leveling
Volume (metric)
45 mL
Work Time
8 Minutes
Follow Us
The brands listed above are trademarks of 3M.
Change Location
United Arab Emirates - English