1. All 3M Products
3M United Arab Emirates
  • 3M™ Fastbond™ Contact Adhesive 30NF, Neutral, 5 US gal Pail
  • 3M™ Fastbond™ Contact Adhesive 30NF, Neutral, 5 US gal Pail

    3M ID 62427485305
    • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
    • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
    • Adhesive can be applied by spray, brush or roller
    • Non-flammable in its wet state
     More
    Specifications
    Application Method
    Brush, Roll, Spray
    Brand
    Fastbond™
    Color
    Neutral
    Environmental Considerations
    California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
    Flame Retardant
    Non-flammable
    Heat Resistance
    <230 Degree Fahrenheit
    Industries
    Construction, Furniture, General Industrial, Military and Government, MRO, Specialty Vehicle, Transportation, Woodworking
    Open Time
    30 minutes to 4 hours
    Physical Form
    Thin liquid
    Product Form
    Bulk
    Solids Weight Percent (Approximate)
    42.4 to 50 Percent
    Substrate 1
    Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
    Substrate 2
    Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
    Units per Case
    1
    Volatile Organic Compounds (VOCs)
    37 Grams Per Litre
    Details
    • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
    • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
    • Adhesive can be applied by spray, brush or roller
    • Non-flammable in its wet state

    3M™ Fastbond™ Contact Adhesive 30NF is a water-dispersed, high-strength adhesive that has high coverage, immediate bond strength, a long bonding range and good heat resistance. Our adhesive bonds most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas to themselves and to each other.

    We designed 3M™ Fastbond™ Contact Adhesive 30NF to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern.

    Recommended Applications

    • Most formed plastics
    • Plastic laminate
    • Wood
    • Plywood
    • Wood veneer
    • Canvas

    High Immediate Strength, Long Bonding Range
    Formulated to be a fast-acting solution, 3M™ Low Mist Contact Adhesive 30NF delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.

    Applying Your Adhesive
    Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    United Arab Emirates - English